Waterjet Parts Coil 10409 Axis 2 ABB IRB2000 Waterjet High pressure Coil Tube

Description

Frequently asked questions and solutions for waterjet coils?

Why does the high-pressure pipe of the water jet get clogged?

There may be many reasons for the blockage of the high-pressure pipe of the water jet. It may be due to excessive impurities in the water, scaling inside the high-pressure pipe, insufficient water inflow to the high-pressure pump, etc.

How to prevent the water jet high-pressure pipe from clogging?

Methods to prevent clogging of the high-pressure pipe of the water jet include cleaning impurities in the water, promptly cleaning the internal scale of the high-pressure pipe, and increasing the water inlet of the high-pressure pump.

What should be done after the high-pressure pipe of the water jet is blocked?

Once the high-pressure pipe of the water jet is blocked, the machine should be stopped immediately to check and clean the high-pressure pipe to prevent damage to the equipment.

How to clean the water jet high-pressure pipe?

When cleaning high-pressure pipes, special cleaning agents can be used, or high-pressure water guns can be used to clean the pipes.

How to avoid secondary blockage?

Methods to avoid secondary clogging include regular cleaning and checking whether the water inlet to the high-pressure pump is sufficient.

The high pressure pipe of the water jet is blocked

When the high-pressure pipe of the water jet is clogged, you can try the following methods to solve it:

1. Use compressed air to remove impurities in the pipe: seal one end of the high-pressure pipe, connect the other end to compressed air, and gently tap the high-pressure pipe with a rubber mallet or mallet to loosen the impurities in the pipe. Then turn on the compressed air and blow the impurities out of the tube. This method can help remove dust, dirt, and other impurities from the pipes and keep them clear.

2. Use cleaning agent to clean impurities in the pipe: seal one end of the high-pressure pipe, connect the cleaning agent to the other end, pour the cleaning agent into the pipe, then close the cleaning agent outlet, open the high-pressure pump, and let the cleaning agent circulate in the pipe. The cleaning agent can dissolve impurities in the tube and bring them out of the tube. This method is more effective at removing oil stains, resin and other impurities in the pipe.

3. Replace the high-pressure pipe: If the above methods cannot solve the problem, the high-pressure pipe may need to be replaced. Remove the old high-pressure pipe, clean the residue at the pipe joints, and then install the new high-pressure pipe, ensuring that the pipe joints are well sealed. If the high-pressure pipe is seriously damaged and cannot be repaired, replacing it with a new one is the best way to solve the problem.

It should be noted that safety should be paid during operation to avoid water or gas in the high-pressure pipe from splashing onto sensitive parts such as skin or eyes. At the same time, regular cleaning of impurities in high-pressure pipes and maintaining good usage habits can extend the service life of high-pressure pipes.

If you are looking for robot waterjet cutting system suppliers or Robotic Water jet Coils suppliers, as well as waterjet technical support needs related to water cutting, please feel free to contact us, we can provide free online support for you.