Waterjet parts Coil 107463 Axis 6 KUKA KR60

Beschreibung

The intensifier does not reverse direction

Reasons:

1. The cutter head gem is clogged or the water switch is not turned on

2. The electro-hydraulic reversing valve spool is stuck

3. The electro-hydraulic reversing valve does not receive a signal
Solution:

1. Check the above components

2. Clean the valve core

3. Troubleshoot so that the electro-hydraulic reversing valve receives a signal

The pressure gauge needle swings greatly when changing direction,Such as unilateral return to zero

Reasons:

1. Check the one-way valve for leakage and heat

2. Check the plug assembly

3. The high-pressure sealing rubber ring is damaged

4. The hydraulic cylinder piston sealing ring is damaged
Solution:

1. Replace the high-pressure valve core and spring

2. Check whether the low-pressure valve core is loose

3. Replace the low-pressure high sealing ring

4. Replace
If both sides return to zero
Reasons:

1. Whether the energy converter gem is not installed

2. Check whether the high-pressure pipeline is leaking

3. Insufficient hydraulic pressure or leakage

Solution:

1. Installation 2. Troubleshooting

For more faults and repair methods, please contact me. Send me a private message and I will find it for you. I will help you solve it.

If you are looking for robot waterjet cutting system suppliers or Waterjet parts Coil  suppliers, as well as waterjet technical support needs related to water cutting, please feel free to contact us, we can provide free online support for you.