B-FT Waterjet Cutting Head Parts

Description

The BFT waterjet valve is designed as an open/closed switch valve which is switched via a pneumatic piston drive. The cutting nozzle required for waterjet cutting is attached directly to the collimation tube of the switch valve via a nozzle holder. Operation with an operating overpressure of up to 4,000 bar and a maximum flow rate of up to 5.0 L/min is possible. We offer high-quality cutting heads for all BFT high pressure pumps in diameters from 0.08 to 0.45 mm.

Your bonus: The waterjet valve was pre-treated at our plant and does not require periodic maintenance.

1. WATERJET VALVE
+ To switch the water jet on and off
+4,000 bar max.permissible positive operating pressure
+ 5 to 7 bar required compressed air supply
+ 1 seconds max. switching time
2. ABRASIVE HEAD
+ Suitable for attachment to the BHDT waterjet valve
+ Optionally available with two integrated dosing nozzles
+ Nozzles with diameters from 0.08 – 0.45 mm available
3. FOCUSING TUBE

First generation B-FT Waterjet Cutting Head Parts WJ070030/168

 

NO.	Numéro de pièce	Nom des pièces
1	WJ070024/025	Corps de soupape
2	WJ070003/168	Siège de soupape
3	WJ070004/590	Bague d'entrée d'objectif
4	WJ070005/551	Tige de valve
5	WJ070006/168	Support de joint
6	WJ070007/527	Soutien
7	WJ070008/527	Bague de guidage
8	WJ070009/150	Étanchéité HP
9		O-Ring 4.3×2.4
10	WJ070029/025	Tige
11	WJ070027/133	Écrou de réglage
12	WJ070028/256	Collet
13	WJ10026/256	Contre-écrou
14	WJ070014/004	Pièce de poussée
15	G01M6x8/359	Goupille de fil
16	WJ070015/320	Cylindre
17	WJ070016/249	Bottom
18	WJ070031/249	Cover
19	WJ070018/249	Piston
20	OR0650030/151	O-Ring 65×3（2x）
21		O-Ring 9.5×3
22		O-Ring 7.5×2.5
23	dr070001/220	Sealing Ring
24	S0372x2.5/426	Safety Ring(2x)
25	450224125/255	Cup Spring(4x)
26	WJ070033/025	Connection Ring
27	WJ070020/004	Adjusting Screw
28	/	/
29	AS013001/220	Scrupper Ring
30	WJ070025/593	Collimation tube
31	VDS143401/256	Écrou de presse-étoupe
32	WJ070032/153	Support de buse
33	D02M8x1/359	Hexagon Nut(2x)
34	220320050/220	Shim Ring(2x)
35	VDS064401/256	Écrou de presse-étoupe
36	VDR064401/261	Sleeve
37	Cover Cap	XA18/220

 

Second generation B-FT Waterjet Cutting Head Parts WJ070060/591

NO.	Numéro de pièce	Nom des pièces
1	WJ070061/591	Corps de soupape
2	WJ070062/338	Cylindre
3	WJ070063/657	Lid
4	WJ070064/327	Bague de guidage
5	WJ070065/338	Piston
6	WJ070066/527	Soutien
7	WJ070067/365	Connection Ring
8	WJ070068/593	Collimation Tube
9	G02M4x6/359	Goupille de fil
10	WJ070027/133	Écrou de réglage
11	WJ070028/256	Collet
12	OR0700020/151	O-Ring 70 x 2
13	WJ070009/150 OR0043024/151	HP Seal Assembly
14	/	/
15	OR0140020/151	O-Ring 14×2(2x)
16	SB229025/220	Absorbtion Disc
17	WJ070282/853	Tige de valve
18	WJ070283/591	Siège de soupape
19	VSTI1/8E/359	Screw Plug 1/8″(2x)
20	VSTI1/8E/359	Screw Plug 1/8″(2x)
21	560285150/255	Disc Spring(7x)
22	28040050/220	Shim
23	48060050/220	Shim
24	VDR143404/261	Sleeve V 14.3(M26x1.5)
25	VDS143404/256	Gland Nut V 14.3
26	WJ070008/527	Guide Bush
27	WJ070059/153	Support de buse
28	VDS064406/256	Gland Nut 6.4 vibro
29	VDR064406/261	Sleeve 6.4 vibro
30	WJ070070/365	Stem Screw
31	G04M6x6/359	Goupille de fil
32	C64PB1/8/220	Male Stud Elbow Fitting

Third generation B-FT Waterjet Cutting Head  WJ-56-0018

NO.	Numéro de pièce	Nom des pièces
1	WJ-75-0022	Valve stem mono
2	WJ-56-0006	Actuator
3		O-ring 4,3×2,4
4		Pressure screw
5	WJ-70-0009	HP-sealing
6		Pressure ring
7		Pressure ring
8		Pressure screw
9		threaded pin M6x6
10		Face pin wrench cranked
11		pressure spring
12	WJ-56-0015	actuator Mounting tool pneum.
13	WJ-56-0020	Mounting tool HP sealing
14	WJ-70-0067	connection ring
15	WJ-70-0059	Nozzle holder
16	WJ-75-0014	Siège de soupape
17	WJ-75-0008	Collimation pipe
18		Counter part
19		Valve housing

Fourth generation B-FT Waterjet Cutting Head WJ-56-0018

NO.	Numéro de pièce	Nom des pièces
1		Valve Body-BFT UV
2	VDS143404_256	Gland NutV 14.3
3	WJ-75-008	Collimation Pipe
4	VDR143404_261	Sleeve V 14.3
5		1820Q
6	WJ070009_150	HP-SEALING
7	OR0043024/151	O-Ring 4.3 x 2.4
8	WJ-75-0022	Valve Stem mono
9	4204718	Pressure Spring
10	WJ-75-0014	Siège de soupape
11	WJ-75-0021	Counter Part
12	WJ070059_153	Support de buse

If you are interested in B-FT waterjet valve cutting head parts,please contact us for parts price list.