Детали гидроабразивного насоса мощностью 100 л.с.

Advantages of 100HP waterjet intensifier pump for cutting car interiors

Using a 100HP waterjet intensifier pump to cut car interiors can bring the following advantages:

High power and large flow:

The 100HP high-power water cutting booster pump can provide higher cutting speed and greater cutting force. This is very advantageous for cutting various materials in car interiors such as plastic, leather, fabric, etc.

High-Precision Cutting:

Waterjet cutting technology is known for its high precision. The water flow generated by the water cutting booster pump can be injected into the material at high speed through a special nozzle to achieve precise cutting. This is useful for parts or details that require fine cutting of car interiors.

No heat-affected zone:

Compared to traditional thermal cutting methods such as laser cutting or flame cutting, water cutting is a cold cutting technology. The water flow of water cutting does not generate heat during the cutting process, so it will not cause thermal deformation or melting of the material. This makes waterjet cutting ideal for cutting temperature-sensitive materials like automotive interiors.

Non-toxic and pollution-free:

Water cutting does not require the use of harmful chemicals or additives, only clean water is used for cutting. This makes water cutting environmentally friendly and non-toxic, causing no pollution to operators or the environment.

Versatility:

Waterjet technology can cut a variety of materials, including metal, plastic, natural stone, composites, and more. Therefore, the use of 100HP high-flow water cutting booster pump can cope with different types of automotive interior materials, providing wide applicability

05144530	Seal Bushing
10142032	Packing Ring
10145431	уплотнительное кольцо
05116140	Запасное кольцо
10168912	уплотнительное кольцо
05116124	уплотнительное кольцо
05116132	U-Cup Seal
80085061	Комплект для восстановления

Advantages of 100HP waterjet intensifier SL-V series

The SL-V series is designed with the same convenience and ease of access for maintenance
The hydraulic cylinder head simply bolts to the hydraulic cylinder.

each high pressure assembly can be removed and serviced independently.

and the hydraulic seal cartridge can be quickly replaced as a single unit.
The robust performance and standard features are the result of aggressive development and decades of experience.

1. Continuous operation at 60,000 psi (4,137 bar) affords faster cutting speeds, resulting in
   lower cost per inch.
2. The innovative hard seal end cap provides a metal-to-metal seal against the sealing head, totally, eliminating the potential for leaks.
3. While dramatically increasing seal life. the unique design of the patented HyperLifeTM seal conforms to the cylinder bore. it expands under pressure, creating an absolute seal.
4. The quick release design of the ceramic plunger greatly simplifies removal and installation.

10189181	Корпус клапана
10178697	Седло клапана
20435636	Шток клапана
10188233	Backup Ring, Brass
20428052	Уплотнение в сборе
10189553	Actuator Assembly, N/O
БВ401184	Пневматический цилиндр
BV601184	Cylinder Head
BV501184	Поршень
10187250	Backup Ring, SST

What’s the other Advantages of 100HP waterjet intensifier SL-V series

1.Each long, slow stroke of the plunger moves more water, while reducing seal and component wear.
2.Comprehensive fault detection and troubleshooting logic monitor crucial pressure, temperature and fluid levels.

3. Warning and shutdown sensors guard against potential equipment damage. Performance options are available at the time of purchase, or as upgrades for existing equipment.

4.The Customer Service Department can provide real time diagnostics.

troubleshooting and data analysis through a modem interface for remote monitoring of the programmable logic controller (PLC).

5.Proportional pressure control allows the operator to select or vary the operating pressure from the control display or remote console.
6.The current operating pressure can be viewed from the control display with an optional pressure transducer.

05144589	Гидравлический поршень
05074380	Стопорный штифт плунжера
05049887	Set Screw, Socket
10148757	Обратный клапан
49877509	Adhesive
05130216	Плоское стопорное кольцо
05146568	Запасное кольцо
10074821	уплотнительное кольцо
05120118	Уплотнение в сборе
05120100	Кольцо подшипника
80085079	Комплект для восстановления

Low Pressure Water System

The low pressure water system supplies the cutting water flow to the intensifier. Major system components include the water filter assembly and the booster pump.

05070982	Relief Valve, 50-150 psi
49838386	Трубный ниппель, 0,75 x 4,0
10119253	Колено, труба, .50 x .50
20413848	Low Pressure Manifold,
49833924	Low Pressure Manifold
49835804	Adapter, Hose/Pipe
72118339	Корпус фильтра в сборе
72121304	Cap Nut Gasket

100HP waterjet intensifier Hydraulic Power Package

The main hydraulic power circuit supplies the intensifier assembly with the hydraulic oil required to produce high pressure water. High pressure cutting water is generated from the oil pressure in the hydraulic cylinder.
System components include the electric motor, hydraulic pump, 4-way directional control valve and the hydraulic manifold. The manifold houses the high and low pressure control valves, hydraulic gauge, two pressure solenoid valve and the main system relief valve. The system relief valve monitors hydraulic oil pressure and provides system protection by limiting excess pressure.

100HP waterjet intensifer motor/pump Assembly

When the flexible coupling fails, the pump shaft will not turn and pressure will not be created.
Typically, failure will be sudden, without any warning signs.
The electric motor and hydraulic pump are mounted in tandem on all SL-V models. Although the configuration is the same, the motor, pump, mountings, connections and components vary slightly according to horsepower. The procedure for replacing the flexible coupling is the same for all models.

Гидравлический коллектор в сборе 72112043

72112035	Гидравлический коллектор
10187417	уплотнительное кольцо
05071055	Вилка, ORB, .75
05103189	Обратный клапан
49876089	Адаптер JIC/ORB, .25 x .25
49889769	Заглушка, ORB, .25

The 100HP waterjet intensifier SL-V Plus series combines all the unique capabilities and advantages of waterjet cutting systems with the reliability, ease of operation and service support .
With 30, 50, 60 and 100 horsepower single and redundant models, the SL-V series accommodates
a wide range of applications. From small, single head requirements to high volume production
requiring multi-head systems; from intricate detailed cutting, to rapid hole drilling; from titanium
to produce, the SL-V series provides the solution.

Hydraulic Hose Connections 05142351