Усилитель в сборе STREAMLINE SL-VI PRO III 60 UHP WATERJET INTENSIFIER

UHP Waterjet SL-VI Pro III 60 HP Intensifier Unit

The UHP waterjet intensifier troubleshooting

1. Inlet water pressure is falling below 30 psi (2 bar) during stroke condition

2. Outlet booster pump pressure is falling below 100 psi (6.8 bar)

3. Water is leaking around the v-clamp on the filter head

4. High oil temperature resulting in shutdown

5. Low oil level resulting in shutdown

6. Hydraulic pressure but no high pressure water pressure

7. Erratic fluctuations in the operating pressure, or inability to reach or maintain set pressure

8. No hydraulic oil pressure

9. Pump shaft will not turn

10. Pump will not start

11. Console display and lights do not illuminate

12. Pump quits running

13. No control power

14. Red light on operator’s console is on

15. Hot surfaces on the high pressure cylinder components

16. Low cutting water pressure

Trouble shouting for UHP waterjet intensifier pump

1. Hydraulic oil leaking from the weep hole in the hydraulic cylinder head18. Water leaking from the weep hole in the hydraulic cylinder head

2. Water leaking from the weep hole in the hydraulic cylinder head

3. Water leaking from the weep hole in the hydraulic cylinder head

4. Water leaking from the weep hole in the sealing head

5. Water leaking from the weep hole in the sealing head gland nut

6. Water leaking from the weep hole in the UHP cylinder flange

7. Water leaking from the weep holes in the dump valve

UHP waterjet intensifier pump parts

The 90,000 psi UHP waterjet intensifier pump is a device used to generate extremely high pressure for use in water cutting applications. This type of pump usually consists of a pump body, an electric motor or diesel engine and a booster system.

90,000 psi UHP Water cutting is a process that cuts materials by pressurizing water to extremely high pressure and spraying it through a nozzle. Ultra-high pressure water cutting can cut on a variety of materials, including metal, stone, concrete and composite materials.

90,000 psi UHP waterjet pump usually has the following characteristics:

1.High-pressure output: The pump is capable of increasing water pressure to 90,000 psi (pounds per square inch), providing powerful cutting power.

2. Booster system: Pumps are usually equipped with a booster system to boost the low-pressure water flowing out of the pump body to the required ultra-high-pressure water.

3. Electric Motor or Diesel Engine: Pumps are typically driven by an electric motor or diesel engine, which provides enough power to push the flow of water and create the required pressure.

4. Safety measures: Ultra-high pressure water cutting booster pumps usually have safety measures, such as pressure regulating valves, pressure relief valves and emergency stop devices, to ensure the safety of operators.

90000 psi UHP waterjet price

The price may change with time and region. The price of UHP waterjet pump is affected by many factors, including brand, model, function and supplier. Generally speaking, a 90000 psi UHP waterjet pump is For high-end equipment, the price may be relatively high. They can be more expensive than regular waterjet pumps because they require special designs and materials that can withstand higher pressures. In addition, brand awareness and after-sales service may also have an impact on price.
If you are interested in 90000 psi UHP waterjet pump, contact win-win waterjet for accurate price and details. They will be able to provide quotes and advice based on your specific needs.

Maintenance of 90000 psi UHP waterjet pump’s dump valve

1. Turn the air supply off.

2. Remove the air supply hose from the valve assembly.

3. Loosen and remove the high pressure gland connections and the drain connection.

4. Remove the valve and actuator assembly from the machine.

5. Loosen the cylinder head on the actuator.Unscrew and remove the actuator from,the valve body.

6. Unscrew the UHP adapter and remove,the adapter and valve seat.

7. Remove the stem, SST backup ring and brass backup ring from the valve body.

8. Remove the seal assembly by pushing it, with the seal push tool (P/N 20470413).The assembly must be pushed out.through the actuator port in the top of the valve body.

9. Discard the stem, brass backup ring, seal assembly and valve seat.

10. Clean and inspect the valve body, being careful not to damage or scratch the bore.

Can you recommend some suppliers of 90000psi UHP waterjet pump?

The following are some suppliers that may supply 90,000 psi UHP waterjet pumps. These suppliers have certain reputation and experience in the waterjet cutting industry and can provide high-quality UHP waterjet pumps and related equipment.

1. Shenyang Win-Win Waterjet Co.,Ltd.
2. Международная корпорация Флоу
3. Джет Эдж Инк.
4. КМТ Водоструйные Системы
5. Корпорация ОМАКС
6. ТЕХНИ Гидроабразивная резка
7. Компания НЛБ.
8. Компания Хаммельманн.
9. ВОМА Австралия
10. Джетстрим из Хьюстона
11. Водоструйная обработка Швеция